12/13/2023 0 Comments Xd compact springfield 9mm camo greenThe XD has another nice feature that accommodates the southpaws among us-ambidextrous magazine releases. Unlike others of the breed, the USA trigger has a very light take-up before an SA-type let-off. Pulling the trigger through a full stroke deactivates the trigger-block safety before the firing-pin safety is depressed and the sear is tripped. When the slide runs forward, a wide tail on the striker engages a fixed sear in the frame that holds it to the rear. While the XD’s Ultra Safety Assurance (USA) trigger system functions like a double-action (DA) trigger, it’s technically a striker fired pistol. RELATED STORY: Springfield’s XD Mod.2 Pistols – Taking Defensive Firepower to the Next Level Both of these devices provide visible and tactile indications regarding the pistol’s condition. In addition, at the rear of the ejection port is a loaded-chamber indicator, and, when cocked, the striker status indicator extends out of the end of the slide. XDs have six separate safety devices-a grip safety at the rear of the frame a trigger-block safety on the face of the trigger a plunger-type firing-pin safety and a disconnect feature. As the slide goes into battery, the barrel is pulled up and its hood enters the ejection port, locking the two units together. A single spring system located under the barrel then pushes the slide forward, stripping the next round out of the magazine and chambering it. When the pistol is fired, the barrel and slide move together a short distance before the barrel drops down on the locking block, allowing the slide to continue to the rear extraction point and ultimately eject the spent case. Locking is achieved by the barrel hood moving up into (and bearing on the front edge of) the ejection port. The slide is machined from solid steel and is protected by a high-tech Melonite finish, both of which enhance the pistol’s resistance to the above named nasty things. The slide reciprocates on two pairs of steel inserts while the dust-cover area features rails allowing the mounting of lights or laser sights. Only three small internal components are also made from polymer, and the frame contains a steel locking block that also houses the lower portion of the feed ramp. The XD uses a polymer frame to provide superior resistance to abuse, wear, oils, solvents and environmental extremes. After some minor changes, it was introduced to the American market as the Springfield Armory Xtreme Duty pistol, better known simply as the XD. While it is perhaps best known for its extensive line of 1911A1-style pistols and M1A rifles, in the 1990s Springfield Armory wanted to break into the police market the company saw what it needed in a polymer-framed pistol made by IM Metal Corporation of Croatia.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |